Beko GmbH

 Clearpoint

CLEARPOINT - Double Quality Filter Housing

Condensate drain plays an important role in ensuring optimum compressed air filtration. The optimum compressed air filtration occurs when filter element captures dirt particle and coalesces oil aerosols.  During the filtration process, a partial of compressed air moisture can too be collected inside the filter housing.  Hence, these effluent mixture(dirt, oil and water)must be removed from the housing constantly to ensure the filter element stays away from being submerged.

Conventional mechanical float drain might fail unnoticed and timer controlled drain is not energy friendly. Therefore, CLEARPOINT filter housings are equipped with the electronically level controlled BEKOMAT 20 FM.   In addition to the well known reliable functions of a BEKOMAT, this unit was developed especially for the use with filters and offers additional advantages:

• Integrated monitoring of the useful lifetime of the filter element to automatically indicate the optimal time of element change

• Easily readable, informative display

• Potential free contact for relaying a fault signal to a control centre

• Condensate discharge at the rear through elbow connector, ideal for installation close to a wall

The new CLEARPOINT compressed air filters offer you a number of important advantages:

• Low, optimized operating costs, economic operation
• Reliable removal of liquids (such as water or oil), dust, gases or aerosols
• Longer filter service life and a higher quality compressed air
• Increased compressor lifecycle
• Improved product quality, lower spoilage rate
• Reduced maintenance, increased productivity
• Better service and working conditions

For stationary and mobile applications from industry to medical: CLEARPOINT^® filters are your guarantee for economic and top quality compressed air filtration.

With about 200 million dirt particles in every m³ of air, it requires a good filter to do the job.  Click to learn about How Compressed air is filtered.

CLEARPOINT Compressed Air Filter Element - Advantages                                     

Not all filter elements are created equal.  Beko's filter element uses high void volume borosilicate of 96%.   Conventional filter element void volume is about 45%.  High void volume means more dirt particle retention and much lower pressure drop across the filter element.

Air Filter Element - More advantages

Corrosion resistance end caps - high durability

Stainless steel support sleeve - will not rust and lower the compressed air quality

Coarse fleece - vital in pre-filtration, especially oil removal

6 layers of filter media - more dirt capture+low pressure drop=energy saving

Also available:

 Clearpoint V - Activated carbon block filter(50~200 m³/hr)

 Clearpoint water separator(35~2,400 m³/hr)

 Clearpoint Flange (1,240~31,240 m³/hr)

 Clearpoint HP 50 barg (130~1,900 m³/hr)

 Clearpoint HP 100~500 barg

 (40~3,400 m³/hr @100 barg)

 (44~1,700 m³/hr @250 barg)

 (48~4,360 m³/hr@350 barg)

 (52~556 m³/hr @500 barg)